Publicité
Les langues disponibles
Les langues disponibles
PART FIGURE
ASSEMBLY INSTRUCTIONS
Unpack your heater and find the wheel-holding plate and butterfly nuts between the
fins assemblies .
1. Make sure the heater is unplugged and in the "OFF" position.
2. TURN THE HEATER UPSIDE DOWN.
3. Attach the wheel-holding plates onto the heater as Fig.1
shows. The U plate is fixed between the last tow fins and
the other one is fixed under metal control box.
Fix the castors to the vertical axis of both the wheel holding
plates.
4. Insert the butterfly nuts and tighten them securely.
5. TURN THE HEATER UPRIGHT.
Your heater is now ready to use .
4
Fig.1
Publicité
