Disconnecting Your Hard Drive; For Windows Users - Verbatim PHP3 Guide De L'utilisateur

in this case the drive will operate only at USB 1.1 speeds.
Note 2: USB under Mac OS 9.2.x. Mac OS versions 9.2.x do not support USB 2.0 Hi-Speed
mode. For these Mac OS versions the drive will operate only at USB 1.1 speeds.
Note 3: USB or FireWire under Mac OS X 10.2. Mac OS X version 10.2 will not mount any
single FAT32-formatted (MS-DOS) partition greater than 128GB. To work around this OS
limitation, you may partition the drive into smaller FAT32 partitions, or you may reformat the
drive to HFS+ format.

Disconnecting Your Hard Drive

Your external hard drive is hot-swappable. It can be connected and disconnected without
restarting your computer. To disconnect your drive at any time, perform the following steps.
You can also disconnect your hard drive at any time while your computer is powered off.
Note: Please be careful to follow the correct procedure when disconnecting
your unit. Simply unplugging the unit without first following the instructions
below may result in damage to your unit and/or loss of data.

For Windows Users:

1. If you have files located on your drive open in any applications, close them.
2. Click the Unplug or Eject Hardware button in the System Tray.
5