Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
1. Left-click the Sequence icon to enter the function.
2. Left-click in the field. Enter the interval in seconds using the numeric keypad and confirm with OK.
3. Left-click OK to confirm and to activate the function.
4. Left-click the Stop Sequence icon to disable the sequence function.

7.2.3 Video Adjust

The video adjustment menu allows detailed image adjustments for each channel with custom modes
(sessions 1, 2 and 3). The custom modes can be used as pre-set modes for e.g. day or night recording. Set as
follows:
1. Left-click the Video Adjust icon to enter the function.
2. Select the channel for your setup.
3. Select the session for your channel, e.g. use session 1 for your day settings, session 2 for your night
settings and session 3 for other settings. Also, identify your session by setting the session time in the time
fields.
4. Manually adjust each item, either by clicking in the bar or by clicking [+] or [-]. You can also select factory
settings (Standard – Soft – Bright – Gorgeous) at the bottom of the window.
5. Left-click Save to save your settings.
6. Repeat for all channels and sessions.
V. 02 – 08/04/2015
CCTVSET2
6
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières