System Setup - Perel CCTVSET2 Mode D'emploi

2. Select your channel and enter all necessary parameters to fine-tune your recording selection.
3. Left-click Backup to save your recording.
 Make sure to have your USB stick connected to the DVR.
7.2.10 Clear Alarm
The Clear Alarm function allows you to clear the alarm settings for one selected channel or all channels.
Proceed as follows:
1. Left-click the appropriate window to select your channel.
2. Left-click the Photos icon to enter the function.
3. Left-click Current to clear the alarm settings for the selected channel or Clear All to clear all alarm
settings.
 Refer to chapter 8.4 Alarm below to set up the alarm function.
7.2.11 Quit
The Quit function allows you to log out, shut down or restart the DVR.
8.

System Setup

The System Setup menu contains all necessary functions to set up your DVR system in detail.
1. Left-click the System Setup icon to enter the menu.
V. 02 – 08/04/2015
CCTVSET2
REMARK
REMARK
11 ©Velleman nv