Publicité
7. Battery Information and Speci cations
This section is intended to provide you basic information about your battery and charger. Please read this section carefully to ensure you. For user safety and to
prolong the life of your battery, as well as improve battery performance, please follow these instructions.
Battery Power
When the Battery Indicator shows lowbattery capacity, please charge your battery 4-5 hours utilizing the charger that you received
in your kick e-scooter package. To fully recharge your battery please follow the instructions under Charging your kick e-scooter.
BATTERY WARNING
Failure to follow the Safety Precautions listed in the Battery Warning could lead to serious bodily injury and death. Seek immediate
medical attention if you are exposed to any substance that is emitted from the battery.
• Do not attempt to modify, change, or replace your battery.
• Do not use your kick e-scooter if the battery begins to emit odor, overheats, or begins to leak.
• Do not touch any leaking materials, or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
• Please only use the charger provided by kick e-scooter.
• Do not attempt to charge the kick e-scooter if the battery has discharged or emitted any substances. In that case, the battery should be abandoned for safety.
• Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium Ion batteries.
• The scooter should only be shipped in its original packaging.
• Do not throw away your box as you need you scooter packaging for future use.
8. Charging your scooter
Step 1: Ensure that the charging port is clean and dry.
Step 2: Plug the charger into the wall, then connect the cable with the power supply
(100 ~ 240V; 50-60Hz), make sure the light on the charger is lit GREEN.
Step 3: Connect the charging cable into the charging port of the kick e-scooter.
The indicator light on the charger should change to RED, indicating that
your kick e-scooter is now being charged. When the RED indicator light on
your charger turns to GREEN, then your kick e-scooter is fully charged.
A full charge typically occurs within 4-5 hours.
Step 4: Please unplug the charger from your kick e-scooter and from the power outlet.
IMPORTANT NOTES ABOUT CHARGING
• If the GREEN light on your charger does not turn RED when you plug it into your kick
e-scooter, it could mean you have to check the cables to ensure you have a
proper connection; or that your kick e-scooter is already fully charged.
• Do not overcharge, as this will affect the life of the battery.
• The best charging temperatures are between 0°~ +35°. Extreme cold and extreme heat
will prevent your battery from charging fully.
• Make sure to unplug your charger before standing on or operating your kick
e-scooter, as this can be very dangerous.
• Use only the kick e-scooter charger that you received in your box.
• If the kick e-scooter is powered on when you enter the plug, the Battery Indicator
will begin blinking, if the kick e-scooter is powered o when you enter the plug,
the Battery Indicator will not blink.
NOTE
Only the indicator light on the charger will tell you the status of the battery
during charging.
11. Thank You
Thank you for the purchase of your new kick e-scooter, and thank for taking the time to read the User Manual. We hope that the information that you obtained from
this manual will help you safely operate, maintain and enjoy your kick e-scooter for years to come. We appreciate your consideration and sincerely hope you enjoy
and share your kick e-scooter experience with all of your friends, family members, and loved ones.
Thank you and welcome to the kick e-scooter movement!
ENJOY YOUR kick e-scooter!
English 3/4
9. Inspection, Maintenance, and Storage
Your kick e-scooter requires routine inspection and maintenance. This chapter
describes maintenance steps and important operating tips. Before you perform
the following operations, ensure the power and charging cable is disconnected.
Inspecting and Cleaning your kick e-scooter
Disconnect the charger and turn off your kick e-scooter.
Routinely check the body of the kick e-scooter and tires for damage or excessive wear.
Avoid using water or other liquids and cleaners on the kick e-scooter for
cleaning. Wet a clean cloth with clean soapy water, rinse the cloth thoroughly,
and wipe the body of the kick e-scooter making sure that water does not get
into the power button, charging port, the foot mats, or tires.
Storing your kick e-scooter
Fully charge your battery before storing.
If you are storing your kick e-scooter for an extended period of time, please fully
charge your kick e-scooter at least once every three month.
If the ambient temperature of the storage location is below 0°, please do not
charge. You must bring the kick e-scooter into a warmer environment before
charging. Check under Battery Information and Specifications for more details.
To prevent dust from getting into your kick e-scooter, try wrapping it or sealing
it with its original packaging.
Store your kick e-scooter indoors, in a dry and suitable temperature.
NOTE
Users who disassemble the kick e-scooter will forfeit their right of warranty.
10. Scooter Speci cations
• Load: 100 kg
• Max. Speed Limit: up to 20 km/h
• Max. Climbing Limit: 15°
Battery Speci cations
Battery
Lithium Battery
Charging time
4-5h
Voltage
36V
Initial Capacity
5.2Ah
Working Temperature
0° ~ +50°
Charging Temperature
0° ~ +35°
Storage Time
12 months
Storage Temperature
0° ~ +25°
Storage Humidity
5% - 95%
• Battery: Lithium-ion, 5.2 Ah, 36 V
• Power Requirement: 100 ~ 240V; 50-60Hz
• Tire: non-pneumatic hollow tire
iconBIT Team
Publicité
