Siemens PA0620M Mode D'emploi page 27

Fig. 10
Then fit the assembly onto the appliance by
slotting it into position Fig. 11.
Fig. 11
Securing the diffusion duct onto the air
expulsion tube
Fit the diffusion duct onto the free end of
the tube pushing both parts gently until the
duct clicks into place. Make sure that the
clips are closed. Otherwise, the duct may
fall off. Fig 12.
Instructions for Use
¡clac!
Fig. 12
27
Ways of releasing air outdoors
Temporary installation
Open the window slightly and position the
diffusion duct between the jamb and the
glaze frame.
Close the window as far as possible and
secure it with the suction pad supplied,
Fig. 13.
• The sliding window/balcony installation
accessory can also be used (See
"Description of accessories"). Fig. 14: a, b,
c, d. This accessory can be used for both
horizontal and vertical windows / balconies.
a
b
Fig. 13