Next Level Racing WHEEL STAND 2.0 Manuel D'instructions page 7

03
Line up the back holes on the pedal plate with the back holes on the pedal brackets and bolt through
using 2 x M8 Bolts and Washers.
04
Adjust the pedal plate to your desired angle and bolt through the front holes using 2 x M8 Bolts and
Washers.
Video Instruction: bit.ly/nlrbuild
PARTS:
• Pedal Plate
• Pedal Plate Brackets
• 2 x M8 16mm Bolts
• 2 x M8 Washers
PARTS:
• 2 x M8 16mm Bolts
• 2 x M8 Washers