Next Level Racing WHEEL STAND 2.0 Manuel D'instructions page 10

support@nextlevelracing.com
09
Uninstall the preinstalled bolts on the vertical posts, adjust to your desired height and re-install the
bolts to lock your height in place.
10
Line up the holes on the Shifter Mounting arm with the threaded inserts on the Shifter Arm and bolt
through with 4 x M8 16mm bolts and washers. Repeat on other side.
REPEAT ON
OTHER SIDE
PARTS:
• 4 x M8 16mm Bolts
• 4 x M8 Washers
PARTS:
• 4 x M8 16mm Bolts
• 4 x M8 Washers