Next Level Racing WHEEL STAND 2.0 Manuel D'instructions page 11

11
Line up the holes on the Shifter Plate with the slots on the shifter arm, bolt through and secure using 2
x M8 55mm Bolts, Washers and Nuts.
12
Line up the holes on the handbrake plate with the threaded inserts on the shifter plate, choose if you
want the handbrake plate flat or angled. Bolt through to secure using 2x M8 16mm Bolts and washers.
(under shifter plate)
(OR)
Video Instruction: bit.ly/nlrbuild
PARTS:
• 2x M8 55mm Bolts
• 2x M8 Washers
• 2x M8 Nuts
PARTS:
• 2 x M8 16mm Bolts
• 2 x M8 Washers