Yeelight Smart LED Bulb W3 Multicolor Manuel D'utilisation page 5

EN
Add Device
・
Go to the Yeelight App homepage, and click "+" in the upper
right corner to add your device.
・
Proceed with the configuration as instructed on the App.
・
Once you've added a device successfully, you can find it in
the device list.
Note: The operation procedure may differ from what's described
here due to App updates. Please proceed as instructed on the App.
This product can also be controlled on Mi home, Google Home
App, and Amazon Alexa. You can download and install one of these
Apps from an App store, and configure your device as instructed on
the App. After you have finished the configuration, you can use the
App to control the light.
How to Restore to Factory Settings
Use the light switch to turn the light bulb on and off five times (on
for two seconds, off for two seconds). The light bulb will display
a circling multi-colored effect, then automatically reset itself and
display a white light after five seconds. This shows that the light
bulb has been restored to its factory settings.
Specification
Model: YLDP005
Lamp Fiting: E27
Rated Power: 8 W
Luminous Flux: 900 lumens
Rated Input: 100-240 V ~ 50/60 Hz 0.07 A
Color Temperature Range: 1700–6500 K
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Service Life: Approx. 15,000 h
Operating Temperature: -10℃ to 40℃
Operating Humidity: 0–85% RH
Operating Frequency: 2412 – 2472 MHz
Maximum Output Power: 16.47 dBm
Dimensions: φ60 × 118 mm
2