Publicité
Les langues disponibles
Les langues disponibles
Note: Your model number is 7930A. It is important that you have your serial number
written down before you install the 10/100/1000 Mbps 8-Port Switch. You can find your
serial number on the bottom label of the switch and on the side of the package. If you
ever need to call our Technical Support department, you will need this number to receive
assistance.
Step 1. Connect the power cord for your country to the 100-240VAC port on
the switch, then plug the power cord into a standard power outlet.
Step 2. Connect your 10/100/1000 Mbps 8-Port Switch to your Ethernet-
ready device.
Congratulations!
The installation of your U.S.Robotics 10/100/1000 Mbps 8-Port Switch is
complete. As connections are established with the 10/100/1000 Mbps 8-Port Switch, the
corresponding LED lights will turn on. Repeat this step as needed for up to seven additional
devices.
2
10/100/1000 Mbps 8-Port Switch
Link/Act
Power
FDX/COL
1 2 3 4 5 6 7 8
1
2
3
4
5
6
7
8
100-240VAC
Publicité
