Publicité
Les langues disponibles
Les langues disponibles
Button
Switch direction
n°
2
left
right
3
up
down
10
up
down
11
left
right
You can adjust the speed of the drone in 3 levels (beginner – intermediate – advanced). The speed
can be controlled with the speed-switch (8).
This device can also make loopings. By pressing the Flip-button (5) and indicating a direction with
the right joystick controller, the drone will make a looping in the direction you have indicated.
To turn the LED lights on or off, press the LED ON/OFF button (7).
When turning the drone on it is standard in the normal mode. This means that its head (indicated
with FRONT) will always be the front direction of the drone. Any direction you command the
drone to fly in, it will always keep the head as its front.
The device also has a Headless-mode. This means that the front of the device depends on the
direction you're flying in. This means that also the sides or the backside can be seen as the front.
To activate this mode, press the LED ON/OFF (7) button for a few seconds. To exit this mode, press
the LED ON/OFF button (7) again for a few seconds.
ATTENTION: The headless mode does not compensate wind or rotation deviations such as
indicated by the fine-tuning buttons.
The device has an Auto Return function. When you activate this function, the drone will fly the
flown trajectory again in the opposite direction to reach the original point of departure. You can
activate the Auto Return function by pressing the Flip button a few seconds.
Please note that the Auto return function does not calculate deviations by wind or other sources.
The original point of departure may vary because of these phenomena.
Drone Reaction
When the device has deviated too much to the right, press the
button to the left to adjust the deviation
When the device has deviated too much to the left, press the
button to the left to adjust the deviation
When the device has deviated too much to the back, press the
button upwards to adjust the deviation
When the device has deviated too much to the front position,
press the button downwards to adjust the deviation
When the device has deviated too much downwards in altitude,
press the button upwards to adjust the deviation
When the device has deviated too much upwards in altitude,
press the button downwards to adjust the deviation
When the device has deviated too much to the right in rotation,
press the button to the left to adjust the deviation
When the device has deviated too much to the left in rotation,
press the button to the left to adjust the deviation
-7-
Publicité
