Pioneer SUPER TUNER III D DEH-P4000UB Mode D'emploi page 44

Section
06 Available accessories
Selecting the SIRIUS channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Press SAT MODE repeatedly to select
the desired channel select setting.
MODE CH NUMBER (channel number select
setting)—MODE CATEGORY (channel cate-
gory select setting)
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
Selecting a channel in the channel
category
1 Select the channel select settings to
MODE CATEGORY.
Refer to Selecting a channel in the channel
category on this page.
2 Push MULTI-CONTROL up or down to
select the desired channel category.
3 Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Using the Game Alert function
Only when SIR-PNR2/SIR-PNR2C is connected
to this unit, you can operate this function.
This unit can alert you when games involving
your favorite teams are about to start. To use
this function you need in advance to set up a
game alert for the teams.
Selecting teams for Game Alert
1 Use MULTI-CONTROL to select
TEAM SETTING in the function menu.
44
En
2 Press MULTI-CONTROL to display the
setting mode.
3 Press MULTI-CONTROL to select a de-
sired league.
4 Turn MULTI-CONTROL to select a de-
sired team.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
5 Press and hold MULTI-CONTROL to turn
the game alert of the selected team on.
The game alert function will start on that
team.
# When you have already made 12 team selec-
tions, FULL is displayed and additional team se-
lection is not possible. In this case, first delete
the team selection and then try again.
6 Repeat these steps for selecting other
teams.
Up to 12 teams can be selected.
Switching the Game Alert on or off
Once you made team selections, you need to
turn the Game Alert function on.
! The Game Alert function is on at the default
setting.
1 Use MULTI-CONTROL to select
GAME ALERT in the function menu.
2 Press and hold MULTI-CONTROL to turn
the Game Alert on.
The Game Alert function is now on.
# To turn the Game Alert function off, press and
hold MULTI-CONTROL again.
When the game of the selected team
starts
When a game of the selected team is about to
start (or is currently playing) on a different sta-
tion, GAME ALERT is displayed. Press and
hold MULTI-CONTROL to switch to that sta-
tion, and you can listen to that game.