JBM 54245 Guide D'utilisation page 16

Option 1: Support with 4 feet – Operation
After adjusting the structure, you can proceed
with the extraction of the injector.
As you screw the nut (G), the screw will extract
the injector.
For the extraction of the injector, it is possible
to use the hydromechanical cylinder instead of
the bearing and the nut.
Note: Make sure that the hydromechanical
cylinder rests perfectly on the support.
Connect the hose of the hydraulic pump to the
hydromechanical cylinder.
Press the pump lever to extract the injector.
Mechanical extraction
Hydraulic extraction
Option 2: Support with 3 feet –
Assembly
Connect the support feet to the central su-
pport.
· 16 ·
REF.54245