Samsung DW80BB70 Serie Manuel D'installation page 15

STEP 5 Unpacking and inspecting the dishwasher
Unpack the dishwasher in an open area free of obstruction both around the packaging
and overhead. We recommend that you retain all of the packing materials until the
dishwasher is fully installed and operational to ensure you have removed all the product's
components from the packing materials prior to disposal.
Unpacking
1. Position the carton right-side-up with
top arrows pointing upwards.
2. Unbuckle or cut the straps securing the
packaging.
3. Unpack the product packaging with
care.
4. Put the straps and all of the packing
materials from around the dishwasher
inspecting them for any signs of
damage.
5. Locate and set aside the dishwasher's
kick plate. The Kick plate is attached to
packing material of the dishwasher.
6. Lift the dishwasher from the packing tray, and then place it on the floor.
CAUTION
• ALWAYS LIFT THE DISHWASHER TO MOVE IT. Sliding it over rough surfaces can
damage the dishwasher's feet and sliding the feet over finished surfaces can, in some
cases, damage that finish or the underlying surface.
7. There is also packing inside the dishwasher that you may want to leave in place until
the dishwasher is installed.
8. DO NOT, under any circumstances, remove the sound-absorbent padding that
surrounds the exterior of the tub of the dishwasher.
DW7000B_DW80B7070_AC_DD68-00242B-01_EN.indd 15 DW7000B_DW80B7070_AC_DD68-00242B-01_EN.indd 15
Kick plate Kick plate
English 15
2022-03-24 2022-03-24 5:59:54 5:59:54