BLUE SKY WBF20 Guide De L'utilisateur page 8

A
STEP 3
L N
Place the top cover [B] on top of
the assembled frame. Attach to the
B
front and back of the frame using
two M6 x 10 mm screws [L] and
M6 nuts [N] in each panel. On the
back panel, the screws should be
inserted through the top cover, then
through the side panel and back panel,
before being secured on the inside
with a nut.
Attach the rain cover [A] to the
top cover using two M6 x 10 mm
screws [L] and M6 nuts [N].
STEP 4
Attach the door [D] to the left front
H
leg using two door hinges [H] and
M
K
four M4 x 10 mm screws [K] and
M4 nuts [M] per hinge.
G
The door latch [G] is pre-assembled.
Make sure to tighten all bolts, but do
D
not overtighten.
8 | www.bluesk youtdoorliving.com