A-4
SETTING UP THE TV
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
Tidying cables
(Only LA79**)
1
Gather and bind the cables with the Cable
Management.
2 Fix the Cable Management firmly to the TV.
Cable Management
(Only LA86**, LA96**, LA97**)
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
y Do not move the TV by holding the cable
holders, as the cable holders may break,
and injuries and damage to the TV may
occur.
Cable Holder
Cable Management
CAUTION
Cable Holder