LG LA79 Serie Manuel D'utilisation page 27

Registering Magic Remote
Control
It is necessary to 'pair' (register) the magic remote
control to your TV before it will work.
How to register the Magic Remote Control
BACK HOME
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
P
on the screen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
MY APPS
complete registration.
How to re-register the Magic Remote Control
BACK
1 Press and hold the BACK
SMART
seconds to reset, then register it
SMART
by following "How to register the
Magic Remote Control" above.
2 To re-register the Magic
Remote Control, press and
hold the BACK
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use magic remote
control
How to use Magic Remote
1 If the pointer disappears, move
the Magic Remote Control
Control
slightly to left or right. Then, it
will automatically appear on the
screen.
» If the pointer has not been used
»
for a certain period of time, it will
disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the Magic Remote Control at
your TV then move it left, right,
up or down.
» If the pointer does not work
»
properly, leave the Magic
Remote Control for 10 seconds
then use it again.
and
buttons together for 5
button for 5
MAGIC REMOTE CONTROL FUNCTIONS
11
-1...
More
If you press Wheel(OK) on the Magic
Remote Control, the following screen
appears.
1
Shows information about the current
programme and screen.
You can select More Menu.
2
Precautions to Take when
Using the Magic Remote
Control
y Use the Magic Remote Control within the
»
maximum communication distance (10 m).
Using the Magic Remote Control beyond this
distance, or with an object obstructing it, may
cause a communication failure.
y A communication failure may occur due to
»
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
y The Magic Remote Control may be damaged
»
or may malfunction if it is dropped or receives
a heavy impact.
y Take care not to bump into nearby furniture
»
or other people when using the Magic
Remote Control.
y Manufacturer and installer cannot provide
»
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y It is recommended that an Access Point (AP)
»
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
23