Publicité
Les langues disponibles
Les langues disponibles
5. Route all wires behind interior panels or under carpeting so they are hidden. Use
supplied cable ties to neatly gather any excess wire.
OPERATION
Please always pair the monitor and camera before the 1
refer to below "Pairing" step.
There are 5 control buttons available for users to have their controls:
Power button
Press the POWER button to supply power to the monitor. The picture on the monitor will
automatically turn on when the vehicle is in reverse gear (when already paired as
described below). When the monitor gets an image, the blue LED will be lit. If there is
power to the monitor, but the monitor does not get any image, the blue LED will blink on
and off. When the monitor power is off, no picture can appear on the screen and the blue
LED will be off.
Menu button
Press the Menu button to enter the menu screen as shown below: Picture SPEC, Picture
Direction, Pair, Product Information.
In general please select the desired menu by pressing the arrow buttons
confirm your choice with the Power Button..
Pairing:
Select the "Pair" icon with the arrow buttons and press the Power button. Shortly after
please press the rubber button on the bottom of camera until the signal is well received
by the monitor and "OK" appears on the screen. The unit will work properly and will
automatically pair by itself in the future operation. Press the menu button to exit the
selection or it will automatically exit after 30s.
st
Menu button
Arrow button
Power button
Arrow button
Guideline button
7
operation, please
and
Publicité
