Smeg CJF01 Manuel D'utilisation page 11

4.3 What to do if...
Problem
The appliance does not
work.
If the problem has not been resolved or in the case of other types of fault, contact
your local technical support centre.
12 12
Cleaning and maintenance
Cause
The plug is not properly
inserted in the power
socket
The cable is defective
Lack of power
Motor protection cut-out
triggered due to continuous
and prolonged use of the
appliance
Solution
Insert the plug into the power
socket. Do not use adaptors
or extensions.
Make sure that the main circuit
breaker is on.
Have the cable replaced at
an Authorised Service Centre.
Make sure that the main circuit
breaker is on.
Wait 15/20 minutes for the
motor to cool down.