System Requirements; Package Contents - D-Link DAP-2610 Guide D'installation

DAP-2610 Quick Install Guide
This installation guide provides basic instructions for installing the DAP-2610 Wireless Access
Point on your network. For additional information about how to use the Access Point, please
see the User's Manual which is available on the CD included in this package or from the
D-Link support website.
Minimum System Requirements:
• CD-ROM Drive
• an Ethernet port, or an installed Ethernet adapter
• Internal Explore 11, Safari 7, Firefox 28, Google Chrome 33 or later versions of these
browsers
ƒ DAP-2610 802.11ac Power over Ethernet (PoE) Access Point
ƒ Mounting Brackets
ƒ CD-ROM
If any of the above items are missing, please contact your reseller.
NOTE no PSU supplied. To power the units use an D-Link PoE switch or the D-Link
DPE-101GI PoE injector.
D-Link DAP-2610 Quick Install Guide

System Requirements

1. Package Contents

1