Publicité
Les langues disponibles
Les langues disponibles
8.4 Before starting a
programme
Make sure that:
• The filters are clean and correctly in-
stalled.
• The spray arms are not clogged.
• The position of the items in the bas-
kets is correct.
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains sock-
et.
9.1 Cleaning the filters
B
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tab-
lets).
• The cap of the salt container is tight.
1.
Turn the filter (A) counterclockwise
and remove it.
C
A
2.
To disassemble the filter (A), pull
apart (A1) and (A2).
3.
Remove the filter (B).
A1
4.
Wash the filters with water.
5.
Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
A2
of the sump.
6.
Make sure that the filter (B) is cor-
rectly positioned under the 2 guides
(C).
7.
Assemble the filter (A) and put it
back in filter (B). Turn it clockwise
until it locks.
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
ENGLISH
31
Publicité
