Publicité
Les langues disponibles
Les langues disponibles
Table of contents
Safety advice ........................................................... 10
Overview ................................................................. 11
Technical data ......................................................... 11
1.
Mounting .......................................................... 12
2.
connection ...................................................... 13
3.
Adjusting the signal type ................................ 13
4.
Inverting the PWM signal .............................. 13
Safety advice
Please pay attention to the following safety advice in order
to avoid danger and damage to people and property.
Instructions
Attention must be paid to the valid local standards, regula-
tions and directives!
Description of symbols
WARnIng!
Warnings are indicated with a
warning triangle!
Î They contain information on
how to avoid the danger de-
scribed.
Signal words describe the danger that may occur, when it
is not avoided.
WARnIng means that injury, possibly life-threatening
injury, can occur.
ATTEnTIOn means that damage to the appliance can
occur.
note
Notes are indicated with an information sym-
bol.
Î Arrows indicate instruction steps that should be car-
ried out.
Disposal
• Dispose of the packaging in an environmentally sound
manner.
• Dispose of old appliances in an environmentally sound
manner. Upon request we will take back your old appli-
ances bought from us and guarantee an environmentally
sound disposal of the devices.
| 10
5.
DIP switches .................................................... 14
6.
commissioning ............................................... 15
6.1 Initialisation phase ........................................................... 15
6.2 Indication of the selected relay .................................... 15
6.3 Error message .................................................................. 15
Subject to technical change. Errors excepted.
Information about the product
Proper usage
The "S-Bus interface adapter" may only be used for the
speed control of a pump in combination with an electronic
controller for solar thermal systems via the S-Bus in com-
pliance with the technical data specified in these instruc-
tions. Improper use excludes all liability claims.
note
Strong electromagnetic fields can impair the
function of the device.
Î Make sure the device is not exposed to
strong electromagnetic fields.
cE-Declaration of conformity
The product complies with the relevant di-
rectives and is therefore labelled with the CE
mark.
Publicité
