Kenwood PureJuice Pro JMP800SI Instructions page 5

safety
Read these instructions carefully and retain for future
l
reference.
Remove all packaging and any labels.
l
If the cord is damaged it must, for safety reasons, be replaced
l
by KENWOOD or an authorised KENWOOD repairer.
Do not use the juicer if the filter is damaged.
l
Never put the power unit, cord or plug in water – you could
l
get an electric shock.
Switch off and unplug:
l
before fitting or removing parts
before cleaning
after use.
Never use a damaged juicer. Get it checked or repaired: see
l
'Service and customer care'.
Only use the pusher supplied. Never put your fingers in the
l
feed tube. Unplug and remove the lid before unblocking the
feed tube.
Before removing the lid, switch off and wait for the filter to
l
stop.
Do not over fill the feed tube or use excessive force to push
l
the food down the feed tube – you could damage your juicer.
Do not process frozen fruit or vegetables. Allow to defrost
l
before processing.
Do not process dried or hard ingredients such as grains, fruit
l
with hard seeds or ice as they may damage the juicer.
Do not reprocess extracted pulp through the juicer as may
l
cause the juicer to clog or stop operating.
Do not touch moving parts.
l
Do not use unauthorised attachments
l
The sorbet attachment is not suitable for processing ice
l
cubes.
Never leave the juicer switched on unattended.
l
Children should be supervised to ensure that they do not play
l
with the appliance.
2