Publicité
Les langues disponibles
Les langues disponibles
Connect the battery to the same connector the old battery was previously
After disconnecting the battery, it is necessary to update the date and
time of the EG-IoT.
After a battery change, it is necessary to reset the indicator of the
estimated capacity of the battery.
Connect the device to the PC with the 4-pin USB-TTL cable
as shown on the following picture.
With Ease_EG_IoT_Config tool
1 - Tick the 'Initialise' box
2 - Record the new battery capacity with the '99'% value.
3 - Click on the 'SEND' button to record the new value in the device.
Inverser le pliage pour la version française.
The information and non contractual pictures in this document are given for indication purposes
only. ercogener SAS reserves the right to modify its products and documentation at any time.
EG-IoT_K016_IS_000
Dct_425_01
Publicité
