Surly Skid Loader Instructions

Skid Loader Dual Battery Instructions
Hi there. Thanks for spending your hard-earned cash on this Surly product. Surly stuff is designed to be useful and durable. We're confident it will
serve you well for years to come.
Warning: Cycling can be dangerous. Bicycle products should be installed and serviced by a professional mechanic. Never modify your bicycle
or accessories. Read and follow all product instructions and warnings including information on the manufacturer's website. Inspect your
bicycle before every ride. Always wear a helmet.
Additional Product and Safety Information can be found at the website http://surlybikes.com/safety
Compatibility
This set of instructions is for upgrading Skid Loader from one battery to two.
Note: This upgrade will not increase the power or speed of the bicycle; it will, however, increase its range capability. This service MUST be performed
by a certified Bosch e-bike dealer. All internet links included in these instructions will require a Bosch Dealer Portal login to access.
Tools Needed
• Torque Wrench capable of 1-45Nm
• Torx - T15, T20, T25
• Torx Plus - IP40
• Hex key - 4mm, 8mm
• Small flat-head screwdriver
• Bosch PowerPack assembly jig (BOSCH P/N 0.275.009.004)
Hardware Required
Item No
1 Bosch PowerPack 400 or 500 ebike Battery – Frame Mount
2 Bosch PowerPack Frame Cable – 220mm
3 Bosch Battery Holder Kit
4 Bosch Holder Mounting Kit – Frame Battery
5 Bosch Plastic Housing Kit for Lock
Bosch Dual Battery Y-Adapter –
6
515/430mm Cable, Charging Socket
7 Surly Battery Mounting Bracket
Abus eBike Battery Lock Core: Bosch Frame Type (DT2),
8
Premium Key (Plus)
Description
6400 West 105th Street, Bloomington, MN 55438
P 877.743.3191 E derby@surlybikes.com W surlybikes.com
Qty
1
1
1
1
1
1
1
1
1
2
3 4
5 6
7
8
449850 2/23 | 85-001484_INST_A