Télécharger Imprimer la page

Salora DVP7046TWIN Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

System Connection
Powering and installation
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
illustration.
SD
AV OUT
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket.See illustration below.
SD
AV OUT
Note:
1.Car cigarette lighter adaptor is not recommended to recharge the battery.
2.Car cigarette light adaptor can only be used when the car power supply is 9-12V.
3.The mains plug is used as the disconnect device, the disconnect device should remain
readily operable.
DC OUT
DC OUT
6
Connecting to monitor
The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor by a DC/AV
cable. Also use this DC/AV cable to connect the AV OUT jack of the unit to AV IN jack of
the Monitor.
Please refer to the illustration below.
Connecting to TV
You can connect unit with TV to enjoy high quality picture and stereo sound.Please
refer to the following illustration:
SD
AV OUT
AV CABLE
AUDIO IN
VIDEO IN
Please use AV cable to connect the machine and the TV. Make sure it is connected
correctly.
SD
AV OUT
DC OUT
DC OUT
Not supplied
7
TV

Publicité

loading