Siemens miniTek Mode D'emploi page 24

Connect the transmitter with the power plug to a
X X
power supply or charge it regularly.
Use one of the supplied cables to connect the
X X
transmitter to an external device
(refer to graphic on previous page).
Press on/off switch to turn the transmitter on.
X X
The LED on the transmitter flashes blue while
searching a connection to your miniTek.
Use the supplied adhesive tape to affix the transmitter
X X
at a suitable place.
Press
X X
miniTek on.
Press on miniTek to change to the audio source
X X
manually (refer to table "Changing the audio source" in
chapter "Basic function").
flashes while your miniTek is searching for a
connection and it shines constantly if a connection is
established.
The LED on the transmitter shines blue if a connection
is established.
Each time you press
next available audio source according to table „Changing
the audio source" in chapter „Basic functions".
24 Using the transmitter
All manuals and user guides at all-guides.com
for about 3 seconds to turn the
, your miniTek switches to the