Kenwood RC410 Instructions page 4

All manuals and user guides at all-guides.com
using your rice cooker
1 Use the measuring cup provided to
measure the desired quantity of
rice. As a guide one cup of rice is
sufficient for one person, but this
will vary according to individual
tastes.
Fill the cup with rice levelling the
top .
2 Thoroughly wash the rice in several
changes of clean water and drain.
Failure to do so may cause poor
results and/or a build up of steam
within the appliance. Do not wash
the rice in the inner bowl as you
may damage it.
3 Transfer the rice to the inner bowl
and level the surface of the rice.
Add sufficient cold water to the
corresponding level marked on the
bowl e.g. to cook 3 cups of rice,
place the washed rice into the
inner bowl and then fill with water
up to the 3 cup level.
models min
capacity capacity
RC410/417 3 cups
You may find that for your own
personal taste you need to slightly
adjust the amount of water added.
For a softer rice add a little more
water, and for a firmer rice a little
less water.
4 Transfer the inner bowl to the rice
cooker ensuring that there is no
rice or any moisture on the outside
of the bowl.
5 Cover with the lid, ensuring that
the vent hole in the lid is situated
away from the operator.
6 Fit the detachable cord to the rice
cooker and then connect the
appliance to the power supply.
Depress the control lever to the
COOK position and the cook light
will glow.
7 Once the rice is cooked, the
appliance will automatically switch
to the WARM position and the
keep warm light will glow. Leave
the appliance on this setting for at
least 15 minutes without lifting the
lid.
8 Carefully lift the lid and allow any
condensation to drip into the rice
cooker. Use the spatula provided
to fluff up the rice which is then
ready to eat. Replace the lid as
quickly as possible. Consume the
stirred rice within 1 hour.
9 Should the inner bowl be lifted
whilst the cooker is in operation,
the appliance will automatically
switch to WARM. To re-commence
cooking, replace the bowl and
reset the control button to COOK.
10 After use, switch off and remove
the plug from the power supply.
to cook vegetables
1 Pour the required quantity of water
max
into the inner bowl. The amount of
water affects the length of
10 cups
steaming time and you should refer
to the list for guidance.
2 Place the food to be steamed in
the steaming basket and place the
steaming basket on the top of the
inner bowl. Vegetables should be
thoroughly cleaned and peeled as
required.
3 Cover with the lid and switch on
the appliance, as directed for
cooking rice.
4. Once all the water has steamed
away, the appliance will
automatically switch to warm and
the light will glow.
5 When removing the steaming
basket, hold the handles using
heat resistant gloves.
6 It is possible to cook rice and to
steam foods simultaneously. You
will need to experiment to establish
appropriate amounts of water and
cooking time for various
combinations.
4