Samsung DV433GTGJWR Manuel D'utilisation page 25

DOOR REVERSAL
1. Unplug the power cord.
2. Remove two door hinge
screws.
3. Lift the door and remove
it.
4. Remove two screws from
the frame front.
5. Remove the two screws
from the opposite side of
the door hinge.
6. Remove two screws from
the holder lever.
7. Reassemble two screws
on inside holes.
DV433ETGJWR_02836H-04_EN.indd Sec2:25 DV433ETGJWR_02836H-04_EN.indd Sec2:25
8. Remove a screw from the
door hinge.
The screw is for pre-
fixing the door to the
frame front.
9. Reassemble the screw in
the other hole.
10. Place the door on the
other side and reattach it
to the dryer.
11. Reattach the holder lever.
12. Reattach the screws in
the remaining holes.
installing your dryer _25
2013-08-08 2013-08-08 4:21:23 4:21:23