ALCOVE OR CLOSET INSTALLATION
The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or
closet.
WARNING
•
No other fuel-burning appliance should be installed in the same closet as the dryer.
•
WARNING: To reduce the risk of fire, this dryer must be exhausted to the outdoors.
See Exhaust information section.
MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:
Sides – 1 in / 25 mm
Rear – 5 in / 127mm
If the washer and dryer are installed together, the closet front must have at least a 72 in² (465 cm²)
unobstructed air opening.
A
1 in.
(2.5 cm)
A. Recessed area
B. Side view - closet or confined area
DV433ETGJWR_02836H-04_EN.indd Sec2:13
DV433ETGJWR_02836H-04_EN.indd Sec2:13
1 in.
(2.5 cm)
27 in.
27 in.
1 in.
(68.6 cm)
(68.6 cm)
(2.5 cm)
Top – 17 in / 432 mm
Closet Front – 2 in / 51 mm
B
17 in.
(43.2 cm)
2 in.
34.1 in.
(5 cm)
(86.5 cm)
installing your dryer _13
5 in.
(12.7 cm)
2013-08-08
2013-08-08
4:21:21
4:21:21