Publicité
ASSEMBLY INSTRUCTIONS
Step 8
Connect the gas hose and regulator using clip and tighten
with screwdriver.
Attach the regulator to the gas cylinder and tighten with
spanner.
WARNING! Ensure the hose does not contact any high
temperature surfaces, or it may melt and leak causing
a fire.
LEAK CHECK
WARNING!
of the gas system is replaced.
WARNING!
in the area while you check for leaks. Sparks or
of the regulator, hose, manifolds and valves. (As step 6 where arrows show )
If the leak cannot be stopped,
Hose / Regulator
h
Regulator / Cylinder
-13-
Publicité
