Sony MSAC-USM1 Mode D'emploi page 19

When the removable disk (Memory
Stick icon) is not indicated (Except
Windows XP)
A separate device driver may already have been installed. Connect this
unit to your computer, and then perform the following procedure.
– When using Windows 2000 –
Log on as Administrator or using a user ID that has administrative
privilege.
1
Double-click the "System" icon on the "Control Panel."
The "System Properties" screen appears.
2
Check if the device driver has already been installed.
1 Click the [Hardware] tab on the "System Properties" screen.
2 Click [Device Manager].
The "Device Manager" screen appears.
3 Click [View].
4 Click [View devices by type].
5 Double-click [Universal Serial Bus Controller].
6 Check whether [? MSAC-USM1] preceded by the "?" symbol is
shown.
Downloaded from: https://www.usersmanualguide.com/
19-US