Hoover Nextra 8 HNC 780 T Manuel D'utilisation page 11

40004542.qxd 12/06/2006
Controls and indicators
START DELAY
INDICATOR
(Départ Différé)
BUZZER
BUTTON
(Arrêt BUTTON
Sonnerie)
Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator (Marche Arrêt) – Press to switch on, the indicator
will light. The display will show the selected programme (see Programme Guide )
Acrylics/Synthetics button (Choix Textile) – Press to reduce the heat level for
delicate items, the indicator above the button will light up. To change the heat
setting the programme must be reset
Low Heat - Indicator light ON
High Heat - Indicator light OFF
Start button (Départ) – Press Start to commence the selected drying programme.
Press for 5 seconds to cancel/reset the programme
Delay Start button (Départ Différé) – Allows the user to delay the start of the
drying cycle (see details of Operation on page 16)
Buzzer button (Arrêt Sonnerie) – The buzzer is active in normal operation. To
cancel the buzzer press the button and the indicator will light up
Empty Water indicator (Réservoir Plein) – Lights when the water container tray
is full
Filter Care indicator (Entretien Filtre) – Lights when the filter needs cleaning
Time to End indicator (Temps Restant) – Lights when the program starts
Start Delay indicator (Départ Différé) – Light flashes when the program starts.
Digital Display – The two digit display indicates the selected programme, the
Start Delay and the Time to End of the programme.
15:15 Page 11
TIME TO END
INDICATOR
(Temps Restant)
DELAY START
START BUTTON
(Départ)
(Départ
Différé)
FILTER CARE
INDICATOR
DIGITAL
(Entretien Filtre)
DISPLAY
ACRYLICS/
ON/OFF
SYNTHETICS
BUTTON
BUTTON
(Marche
(Choix Textile)
Arrêt)
EMPTY WATER
INDICATOR
(Réservoir Plein)
PROGRAMME
SELECTOR
11