GEONAUTE On step 600 Mode D'emploi page 7

All manuals and user guides at all-guides.com
INITIAL SETTING OF THE PEDOMETER
To start up the product, press the button at the top right.
You will automatically be taken to the device's set-up menu.
Changing the values is carried out using buttons
6
(+) and
A
Setting the measurement units
(M / INCH)
If the product is not used for 3 minutes, you exit
settings mode.
To return to settings, press and hold the B button
for 3 seconds.
And refer to the chapter on reprogramming
user settings.
(-).
C
Size