CARPOINT 0177707 Mode D'emploi page 2

JuMpstarter WItH aIr coMpressor
Figure 1 • Front view showing control panel
1 12V output socket with overload protection
2 Color coded battery meter
3 Heavy duty 400A booster clamps
4 Switch
5 Impact resistant polyethylene case
6 230V AC adapter/charger
7 DC-DC power cord
8 Emergency light switch
9 Emergency light
10 DC charging LED and socket for charging plug
Features
• 900A peak/400A boost starting power.
• Starts cars, trucks, recreating vehicles and boats without the need of a host vehicle or AC power cords.
• 12DC cigarette lighter socket with overload protection provides power for utilities and appliances that usually plug into a vehicle or boat 12V cigarette
lighter socket.
• Provides up to 50 hours of DC power when use with 12V DC appliances.
• Allows 12V DC appliances to be used in remote sites and/or in emergency when commercial power is not available.
• Solid-state, automatic operation and circuit protection.
• Sealed, maintenance-free, heavy-duty battery safely use.
• This system can be stored without risking acid leakage.
• Heavy-duty industrial type welding cables can carry more amperage than similar units.
• Battery condition meter is color coded and easy to read.
• DC-power cord allows recharging from 12V DC cigarette lighter socket.
• Molded high-impact case is tough and durable.
• Has a built-in light for roadside vehicle repairs for emergency situations.
InstructIon
Your jumpstarter is designed as a compact, durable and portable system for vehicles and boats. This self-contained system will start most vehicles and boats
without the need for a host vehicle or 230V AC power supply. This system can also be used as a safe, portable source of 12V DC electric power in remote
locations and/or in emergencies.
The jumpstarter has an easy to read, color coded battery meter that indicates charge level. A 12V DC cigarette lighter socket is provided for use with
appliances that would operate from a vehicle cigarette lighter. This allows maximum portability and utility when your jumpstarter is used in remote locations.
For maximum convenience, your jumpstarter can be recharged with the separately provided 230V AC Adapter/charger. A square, green, covered cigarette
lighter 12V DC socket is provided. The red LED illuminates when this system is recharging.
WarnIng! Always wear eye protection when working on or around lead-acid batteries.
If splashed with battery acid: immediately wash effected areas such as face and particularly the eyes with clean water. Continue washing area and face
until medical help arrives.
Figure 2 • Air compressor
A Pressure gauge
B Compressor switch
C Inflating hose and cover of the compartment for storing of the hose