VITO VIAS600 Mode D'emploi page 22

When using power tools, you should take into
account basic safety precautions to avoid the risk of
fire, electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
Always take in consideration that in using the power tool
you accept full responsibility for any accidents caused to
third parties or their property during its use.
Individuals who have not read the instruction manual and
are not familiarized with how to operate the vacuum/blower
must not use it. Before using the power tool for the first
time, users should be instructed by the seller or any other
qualified person on how to use the power tool. Users must
ensure they are instructed adequately and practically.
The instruction manual is considered an integral part of the
vacuum/blower and must always be made available
alongside the product.
Familiarize yourself with the control devices and usage of
the power tool. In particular, the user must know how to
quickly stop the power tool.
Stay alert and use common sense while working with a
power tool. A moment of inattention can result in serious
injury.
Do not use the power tool if you are not both physically and
mentally well. Do not use it while you are tired or under the
influence of medication, drugs or alcohol. If you have a
health problem, ask your doctor if it is safe for you to use
the power tool before doing so.
Never allow the vacuum/blower to be used by children,
individuals with limited physical, sensory or mental
abilities, individuals with lack of experience and knowledge
of the tool, or others unfamiliar with the use instructions.
The power tool may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to
the power tool, is not permitted.
Do not overload the power tool and use proper tools for
each type of work. The use of the power tool for purposes
other than those intended and improper use of accessories
may result in hazardous situations.
For safety reasons, any alteration to the vacuum/blower
other than installing accessories specifically authorized by
the manufacturer, is prohibited. The warranty on your
vacuum/blower will be voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
The power tool has double insulation, which means
that all external metal parts are insulated from the
electrical components. Therefore, in accordance with EN,
standard, no earth connection is required.
Do not expose the power tool to rain or use it in wet or moist
environments. The presence of water in a power tool
increases the risk of damage to the power tool and electric
shock to the user.
Do not use power tools in explosive environments, in
the presence of flammable liquids, gases or dust.
Power tools create sparks that can ignite liquids, gases, or
dust.
Individuals who have not read the instruction manual and
are not familiarized with how to operate the vacuum/blower
must not use it.
To ensure that you work with the power tool safely, you
should take into account a few precautions and procedures
before start-up:
▪
Inspect the power tool before each use. Check that the
attached accessories are assembled correctly and in
good condition. In case they are excessively damaged or
worn out, replace the accessories;