Electrical Connection - Diehl Metering IZAR Receiver M-Bus Guide D'installation

IZAR RECEIVER M-Bus
6.1 Install wall bracket
The wall bracket must be evenly mounted on a
straight and flat wall.
The installation position must be straight.
ƒ
Use the two screws to properly attach the wall bracket
to a wall (measures see Fig. I)
6.2 Install IZAR RECEIVER M-Bus(Abb. II)
1. Put the IZAR RECEIVER M-Bus onto the wall bracket
and push it downwards till it locks.
2. Slide the cover for the connections from bottom into
the provided recess.
3. Lock the cover with the supplied plastic seal.
6.3 Remove IZAR RECEIVER M-Bus (fig. III)
1. Turn the plastic seal with a screwdriver till it breaks.
2. Slide the cover for the connections to the bottom.
3. Lift the locking in order to slide the IZAR RECEIVER
M-Bus upwards and to remove it from the wall bracket.
7.

Electrical connection

The cover cap for the electric connection of the
IZAR RECEIVER M-Bus must be removed.
- 14 -
English