Publicité
Les langues disponibles
Les langues disponibles
Playing Cassette Tapes
Note: Before inserting a tape in the player be sure that there is no excess slack
in the cassette that could become jammed in the mechanism.
Refer to the CARE AND MAINTENANCE section for instructions on removing
excess slack from the cassette.
1.)
Rotate the OFF-VOLUME control clockwise until
,
a click is heard and set the Volume to a low
level. The POWER indicator comes on .
2.)
Set the Function selector (AM/FM/TAPE/CD/PHONO) to the TAPE position.
3.)
Insert your cassette into the slot located on right side cabinet, as shown in
the illustration, with the side you wish to play facing up and the open end
on the right side.
Cassette Tape
4.)
Cassette playback begins as soon as the tape is inserted. Adjust the OFF-
VOLUME control to the desired level.
To advance the tape rapidly, depress the EJ/FF (Eject/Fast
5.)
Forward) button approximately half way. The tape will move
forward rapidly as long as the button is depressed. Normal
playback will resume when the button is released.
6.)
When the tape ends, the player stops automatically. Depress the
EJ/FF (Eject/Fast Forward) button completely to remove the
cassette from the player. You may press the EJ/FF (Eject/Fast
Forward) button to stop playback and remove the cassette at any
time.
To turn the system
7.)
clockwise until a click is heard. The POWER indicator goes off .
,
,
off
, rotate the OFF-VOLUME control counter
,
16
POWER
RANDOM
PROG.
,
Open End
,
Publicité
