Adventys GLP 6000 Guide D'utilisation page 14

Eliectrictli connection
- Unscrew the 4 screws of the bottom plate, located under the unit to access the connection terminal
block area.
- Prepare a sector cable equipped with 5 conductor caps wiring.
- Place the cord into the cable clamp and tighten the cable clamp to secure the power cords.
- Connect the 5 wires of the power cord to the terminal block in accordance with the following diagram.
Input Power Cord
- Replace the bottom plate by screwing the 4 screws.
- You can connect the power cord to a standard single phase dedicated outlet 208/240 V.
Minimum apecificttiona of power corda :
GLP 6000
Connecting Plate
6-50P
Power Cord
Terminal connection cord
according with markings :
L1 (brown)
L2 (black)
L3 (grey)
N (blue)
Ground (green/yellow).
14