Dynex WS-007 Guide De L'utilisateur page 7

Setting up your RF modulator
Component
7 TO TV
8 CHANNEL
9 ANT IN
Setting up your RF modulator
To set up your RF modulator:
1 Plug an A/V cable' s video (yellow) connecter into the VIDEO
jack on the back of your RF modulator and into the video
out jack on your external device.
Or
Plug an S-Video cable into the S-VIDEO jack on the back of
your RF modulator and into the S-Video out jack on the
back of your external device.
2 Plug the A/V cable's the right (red) and left (white) AUDIO
connectors into the corresponding jacks on the back of your
RF modulator and into the audio out jacks on your external
device.
3 Plug one end of a coaxial cable into the ANT IN jack on the
back of your RF modulator and the other end into your
antenna or cable TV jack.
4 Plug one end of a coaxial cable into the TO TV jack on the
back of your RF modulator and the other end into the
antenna in jack on the back of your TV.
5 Plug the power cord into the power connector on the back
of your RF modulator and into and electrical outlet.
Description
Plug one end of a coaxial cable into this jack
and plug the other end of the cable into the
antenna in jack on the back of your TV.
Slide this switch to channel 3 or 4.
Plug one end of a coaxial cable into this jack
and plug the other end into your antenna or
cable jack.
7