GoPro HERO4 Silver Mode D'emploi page 44

/ Multi-Shot Mode
CAPTURING TIME LAPSE OR NIGHT LAPSE PHOTOS
To capture a Time Lapse series, verify that the camera is set to
capture Time Lapse photos. If the Time Lapse icon [
appear in the upper left on your camera's touch display, swipe left,
tap Multi-Shot and then tap Time Lapse.
To capture a Night Lapse series, verify that the camera is set to
capture Night Lapse photos. If the Night Lapse icon [
appear in the upper left on your camera's touch display, swipe left,
tap Multi-Shot and then tap Night Lapse.
To Capture Time Lapse/Night Lapse Photos:
Press the Shutter/Select button [
and the camera status lights (red) flash each time a photo is captured.
To Stop Time Lapse/Night Lapse Photos:
Press the Shutter/Select button [
flash three times and the camera emits three beeps.
PRO TIP: When the camera is off and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing Time Lapse
photos just by pressing and holding the Shutter/Select button [
two seconds. Press again to stop recording and power off the camera.
For details, see Setup Mode.
44
All manuals and user guides at all-guides.com
]. The camera initiates countdown
]. The camera status lights (red)
] does not
] does not
] for