Technical Data - Husqvarna R 120S Manuel D'utilisation

Dimensions
Length with cutting unit, cm/ft
Width with cutting unit, cm/ft
Height, cm/ft
Operating weight with cutting deck, kg/lb
Wheel base, cm/ft
Tyre dimensions
Air pressure, rear - front, kPa / bar / PSI
Max. gradient
Motor
Brand / Model
Nominal engine output, kW (see note 1)
3
Displacement, cm /cu.in
Max.motor speed, r/min
Fuel, minimum octane grade lead-free
Fuel tank capacity, US pint/litre
Oil, class SJ-CF
Oil tank capacity, US pint/litre
Starting
Electrical system
Type
Battery
Spark plug
Electrode gap, mm/inch
Main fuse
Transmission
Brand
Forward speed, km/h.
Reverse speed, km/h
Cutting unit
Type
Cutting width, cm/inch
Cutting heights, 5 positions, mm/inch
Blade length, mm/inch
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs.
The warranty is not valid if non genuine parts are used.
28 –
English

TECHNICAL DATA

R 120S
229 / 90.08
126,3 / 49.7
108 / 42.7
225 / 496
84 / 33.07
165/60-8
60 / 06 / 8.7
10°
Briggs & Stratton / 4195
11
500 / 30.5
3300 ± 100
87
7 / 14.8
SAE 5W/30 or SAE 10W/30
1,4 / 2.96
Electric starter
12 V, negative earthed
12 V, 20 Ah
EMS PLATINUM
0,75/0,030
Flat pin, 15 A.
Tuff torq T36N
0-9 / 0-5,6
0-9 / 0-5,6
SD 42
107 / 42
25-100 / 1-4
430/17