Publicité
Les langues disponibles
Les langues disponibles
Oscillation
Press the OSC button to activate the oscillation. Press again to
deactivate the oscillation.
Timer
You can set the timer by pressing the TIMER button so that the fan
turns off automatically after the selected time has been reached. Press
the TIMER button to set the timer, up to 7.5 hours. Each time the
button is pressed the timer increases by 30 minutes and the selected
time will be displayed on the control panel. To deactivate the timer
press the button until all timer indicators light off or display 0.
Mode
Press the MODE button to change the wind mode, the LED
corresponding to the selected mode lights up.
Normal mode (NORMAL) : the fan operates normally according to the
selected speed.
Natural mode (NATURE) : the fan reproduces the effect of the wind by
operating alternately at different speeds and intermittences : low,
medium and strong effects of natural wind.
Sleep mode SLEEP) : When you fall asleep, the body temperature
decreases gently. This means that you are less and less in need of the
fan as time goes by while you sleep. If you select this mode, the fan will
reduce its speed and reproduce the effect of the natural wind in
different ways depending on the selected speed. The night mode is
ideal in case of sensitivity to colds.
Pitch angle
You can adjust the angle of the head manually by
moving the fan head vertically. Simply raise or
lower the fan head manually to the desired position.
WARNING : Only do so when the fan is off and
the plug is disconnected from the mains. Never
force to avoid damaging the appliance.
25
Publicité
