Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PROBLEM
CAUSE
ACTION
Safety lock.
Tighten the hand screw firmly.
The motor does not run
Power failure.
Tighten the hand screw firmly.
The material is jammed in the
Switch the shredder OFF.
feeding funnel.
Pull the material from the feed
funnel. Switch the shredder back
ON and refeed thick branches
such that the blade does not
immediately engage the
The material to be chopped is
pre-cut notches again.
not drawn in
Shredding material is too soft.
Insert wood or shred dried
branches.
The cutting blade is blocked.
Loosen the hand screw, open the
shredder and remove the material
that causes the blockage.
29
Publicité
