Télécharger Imprimer la page

White&Brown Barcelona MF 20 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
- Don't place heavy utensils or trays on the open door.
- CAUTION: if the door or the door catch is damaged the oven must not be
used until repaired by a competent technician.
- CAUTION: Do not use the appliance if the glass is cracked or broken.
- CAUTION: Water condensation may appear on the surfaces and objects
around this appliance.
Service:
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Installation
- Be sure to remove all packaging material from inside the appliance.
- Do not remove the support feet of the appliance.
- Do not cover or obstruct any of the openings of the appliance.
- The plug must be easily accessible so it can be disconnected in an emer-
gency.
Instructions for use
Before use:
- Make sure that all the product's packaging has been removed.
- Before using this product for the first time, it is advisable to test it without food.
- Before using the product for the first time, clean the parts that will come into
contact with food in the manner described in the cleaning section.
- Some parts of the appliance have been lightly greased. Consequently, the first
time the appliance is used a light smoke may be detected. After a short time,
this smoke will disappear.
- To eliminate the smell given off by the appliance when used for the first time, it
is recommended to have it on at full power for 2 hours in a well-ventilated room.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Introduce grid (P) or cooking tray (O) on one of levels (B)
- Select the appliance function desired (G).
- Select the appliance temperature desired (F)
- Select desired cooking time (H)
-The pilot light (I) comes on.
- After the selected time the appliance will switch off automatically.
Once you have finished using the appliance:
- Unplug the appliance from the mains.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and allow it to cool before underta-
king any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to
the inner parts of the appliance
- Never submerge the appliance in water or any other liquid or place it under
running water.
Crumb tray (Q):
- This appliance has a tray which allows the crumbs to be caught inside the
appliance.
- Ensure that the appliance is cooled before handling crumb tray.
- Remove the appliance's tray.
- Pour away the contents of the tray.
- Replace the tray inside the appliance.
Anomalies and repair
- Take the appliance to an authorised technical support service if product is
damaged or other problems arise. Do not attempt to disassemble or repair the
appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included
in a collection, classification and recycling system. Should you wish to dispose
of them, use the appropriate public recycling bins for each type of material.
- The product does not contain concentrations of substances that could be
considered harmful to the environment.
This symbol means that in case you wish to dispose of the
product once its working life has ended, take it to an authorised
waste agent for the selective collection of Waste from Electric and
Electronic Equipment (WEEE).
This symbol means that surface could to get hot during the use
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive
2004/108/EC on Electromagnetic Compatibility, Directive 2011/65/EC on the
restrictions of the use of certain hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on the ecodesign requirements for
energy-related products.

Publicité

loading