Publicité
Les langues disponibles
Les langues disponibles
Installation
Assembly of Components and Parts List
NOTE: If the alarm system is ordered with the model S19-300T or S19-300B Heat Trace Shower and Eye
Wash, the mounting bracket will be attached to the unit.
JUNCTION
BOX
269-1314
CONDUIT
CONNECTOR
269-1308
TO POWER
SUPPLY
FLEXIBLE
CONDUIT
269-1588
Parts not shown:
• Wire nut 269-532 (qty. 6)
• Conduit connector 269-1308 (qty. 2)
• Conduit reducer 269-1317 (qty. 2)
• Emergency tag 204-421 (qty. 1)
• Pipe plug 269-1294 (qty. 1)
Supplies required for installation:
• Teflon tape or pipe sealing compound
• Black, white and green 14 AWG wire to connect alarm to electric power supply
Bradley Corporation • 215-1083 Rev. F; EN 07-511
STROBE LIGHT
269-1305 (120V)
269-1305A (220/240V)
NIPPLE
269-1316
CUT-OUT
SWITCH BOX
TO FLOW
269-1309
SWITCH
HORN
269-1306
SWITCH
269-1421
7/5/07
S19-320EXP120, S19-320EXP220
NIPPLE
269-1342
MOUNTING BRACKET
ASSEMBLY
S70-156
U-BOLT (qty. 2)
269-587
NUT (qty. 4)
161-065
CONDUIT
CONNECTOR
269-1308
JUNCTION
BOX
269-1312
FLOW
3
Publicité
