Fujitsu STYLISTIC Q736 Guide De Démarrage Rapide

STYLISTIC Q736
Quick Start Guide / Guide de démarrage rapide
1
2
3
1
1
2
2
4
5
USB
HDMI
6
7
optional
For FAQs, Downloads, Manuals, Tech Specs
and Help Chat, go to:
Pour consulter la FAQ, les téléchargements,
les manuels, fiches techniques et
l'assistance par chat, rendez-vous sur :
http://support.fujitsupc.com/CS/Portal/support.
do?srch=GUIDES
4G WWAN Installation and Activation
Only applies to systems with an embedded 4G module.
+ Carrier support may vary depending up on your model.
To activate 4G WWAN service on your device, you will need to
perform the following steps.
Obtaining and installing a UCCID (SIMcard):
► Contact your carrier and request a SIM/UCCID card.
H DMI
For LIFEBOOK® E734/E744, T725, T726, T734, T904, T935, and
T936, you will need a 2FF SIM.
For STYLISTIC® Q616, Q665, Q704, Q736 and Q775, you will
need a 3FF SIM.
Installing a SIMcard
► For the LIFEBOOK E734/E744, T725, T726, T734, T904, T935
and T936, the SIM slot is located under the battery (Battery
must be removed to access the SIM slot.) See your User's
Guide on how to properly remove your battery.
► For the STYLISTIC Q704, the SIM slot is located on the "Right
Side" of the Tablet. See your User's Guide for locating this slot.
► For STYLISTIC Q616, Q665, Q736 and Q775, the SIM slot is
located on the "Left Side" of the Tablet. See your User's Guide
for locating this slot.
Specific WWAN modules are tested with this
computer for compliance with FCC regulations.
These WWAN modules are authenticated to work in
Caution your computer. Other WWAN modules will not work
in your computer. You are strongly advised to order
your WWAN module from a FUJITSU-authorized
source. In the event you install a WWAN module
that has not been authorized by FUJITSU, FUJITSU
assumes no responsibility for damages to the device
or your computer that may result from its installation.
Activating your wireless device
Carrier support may vary depending upon your model.
► Before using your wireless device, you need to contact your
carrier to activate your Mobile Broadband service.
You will need to have your IMEI (International Mobile Equipment
Identity) readily available in order to activate your account.
1. IMPORTANT: Ensure that you select the correct firmware for
your carrier in Skylight.
2. To find your IMEI number, click on the Skylight icon on your
desktop, then click on the small Menu icon in the taskbar at the
top of the Skylight window (it's the fourth from the right).
3. Select About..., then click Device in the left pane. The IMEI
numbers (15 digits) will be displayed in the right pane. The IMEI
number can also be found on the label on the unit's box.
4. Firmware change: Click on the Skylight icon on your desktop,
then click on the Option (Wrench sign).
5. Select \Firmware, then select the proper firmware for your
network carrier, the click Apply.
6. Contact your carrier with the information:
AT&T: Call 1-800-908-9403 or contact your account representative
Verizon Wireless: Call 1-800-256-4646 or contact your account
representative.
Published by
FUJITSU AMERICA, INC.
1250 East Arques Ave.
Sunnyvale, CA 94084-3470, U.S.A.
Creation
Xerox Global Services
Edition: 1
01/2016
Order No.: B5FK-6951-01EN-00
B5FK-6951-01EN-00