Amsta AMHIV60FAJB Manuel D'installation page 12

12
4. CONTROLS
Button Function
- Turns the lighting system on and off at
maximum intensity.
- Press and hold 2 second to activate timer
A
mode at speed one, two or three.
Delay timer is 5 minuts and Led D flashes.
- Turns the suction motor on and off at speed one.
- Press and hold 5 seconds to enable/disable the
B
Carbon Filters alarm (default status: disabled)
All LEDs flash twice: alarm enabled.
All LEDs lit for 1 second: alarm disabled.
- Turns the suction motor on and off at speed two.
- Press and hold 5 seconds when all loads are off
C
(Motor+Light) to perform a saturated grease or
carbon filters alarm reset. All LEDs flash 3 times.
- Turns the suction motor on and off at speed
three.
- Press and hold 3 seconds on third speed button
switches to intensive speed with a duration of
D 6 minutes. Led flashes.
- Press and hold 3 seconds before the 6 minutes
end switches back to third speed. Led is on
- Short push before the 6 minutes elapse switches
the hood off
5. LIGHTING
• For replacement contact technical support ("To
purchase contact technical support").
Lamp power (W)
Lamp Type (V)
Lamp Size (mm)
Energy Class
FILTER MANAGEMENT
Grease filter alarm
Signals the saturated metal grease filters
alarm and the need to wash them. The alarm
is activated after 100 hours of effective hood
operation. Leds b and c lit with motor and light off.
Carbon filter alarm
Signals the activated charcoal odour filter
saturation alarm. The alarm is activated after 200
hours of effective hood operation. Leds b, c and d
lit with motor and light off.
1,1
LED 12
Ø 65
G