Publicité
Les langues disponibles
Les langues disponibles
Mount the brackets to the bottom of the
enclosure using the supplied smaller
screws. Securely attach the enclosure to
the vehicle with the supplied larger
screws.
Pro Tip: You are one ZX
Mono-Amplifi er and a few
cables away from a complete,
high-quality system with
rock-solid bottom end, as
only available from KICKER!
The KICKER ZX line of mono-
amplifi ers make it easy to upgrade
the bassline of your stock or
aftermarket source unit. Please ask your
dealer about KICKER ZX amplifi er upgrades.
We recommend you leave at least four inches (10cm) of clear space around the vent.
Plug your subwoofer speaker wire into the terminals, using the red connector as positive and the black
connector as negative. Hook the other end of the wire to your subwoofer amplifi er in accordance with its
owner's manual.
SPECIFICATIONS
Model
Nominal Impedance [Zn], ohm [per enclosure]
Sensitivity [SPLo], dB @ 1W, 1m
Power Handling Watts, Peak (RMS)
Enclosure Top Surface Depth, in (cm)
Enclosure Bottom Surface Depth, in (cm)
Enclosure Height, in (cm)
Enclosure Width, in (cm)
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
IMPORTANT SAFETY WARNING
To avoid potential injury or possible death from forward movement of the enclousre during abrupt stops or accidents, the
enclosure must be properly installed and securely fastened to your vehicle. You are soley responsible for securely fastening the
enclosure in your vehicle.
Note: The use of a subsonic fi lter will signifi cantly increase power handling. The power handling specifi cations in this chart are
calculated using a 25Hz, 24dB/octave subsonic fi lter. All specifi cations and performance fi gures are subject to change. Please
visit www.kicker.com for the most current information. To get the best performance from your new KICKER Subwoofer, we
recommend using genuine KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach
optimum performance.
Comp Subwoofer - Covered by one or more of the following patents:
U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293, D355,193,
Taiwan Pat. #162,154; Other U.S. and foreign patents pending.
P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510
2010 Comp Box Multilingual b01.indd 3
2010 Comp Box Multilingual b01.indd 3
DC10
DC12
2 or 4
2 or 4
98.4
99.9
600 (300)
600 (300)
13-1/2 (34.2)
13-7/8 (35.2)
16-3/8 (41.5)
17-1/4 (43.8)
14 (35.5)
16 (40.5)
28-1/2 (72.3)
32-7/16 (82.3)
stillwaterdesigns
Behind-the-seat mounting:
subwoofer fi res into
the back of the
seat.
VC12
TC10
4
4
95.3
93.8
300 (150)
300 (150)
11-1/4 (28.5)
4-3/4 (12)
14-5/8 (37.1)
7-11/16 (19.5)
16-1/8 (40.9)
13-3/4 (38.4)
17-11/16 (44.8)
21-3/4 (55.1)
9/18/2009 10:10:55 AM
9/18/2009 10:10:55 AM
3
Publicité
